zofa30
09-14 05:04 PM
Thanks a_yaja and thanks for all who helped me in this issue,
Yes I am on EB2+PERM. Thanks for the explanation. I now understand the situation.
I have a couple of questions that will help me to figure out what to do:
1-When legally I can start applying for new EB2+PERM with the new employer? Can I start right away from day one or I should work for the new employer for a certain period?
2-What is the best way to have a safe H1B transfer? In other words should I ask my new employer to transfer H1B then resign from the current job once I received the new H1B or how it should be? Please advice.
Thanks.
Yes I am on EB2+PERM. Thanks for the explanation. I now understand the situation.
I have a couple of questions that will help me to figure out what to do:
1-When legally I can start applying for new EB2+PERM with the new employer? Can I start right away from day one or I should work for the new employer for a certain period?
2-What is the best way to have a safe H1B transfer? In other words should I ask my new employer to transfer H1B then resign from the current job once I received the new H1B or how it should be? Please advice.
Thanks.
wallpaper Mercedes-Benz SLK350
san3297
09-04 04:39 PM
Thanks for a positive reply at last.I checked my both 797s my current one ends on Nov 14 and my future one starts at Nov 15.So i see there is no gap.Hopefully i will be good i guess.I am planning to go to Charlotte Border Security and see if they say me the same.Any way your comments made me rethink that i will be ok.
Krilnon
01-21 11:31 PM
Feel free to steal any of the tedious collection work that I've done, like the JS/AS array associating the filename, author, and title.
Here is a ZIP archive with the SWFs that I harvested: http://reclipse.net/kirupa/fxpression09/fxpression_entries.zip
Here is a ZIP archive with the SWFs that I harvested: http://reclipse.net/kirupa/fxpression09/fxpression_entries.zip
2011 Mercedes-Benz SLK 350
jliechty
May 28th, 2007, 09:24 PM
Visible Dust products used to cost way more than they were worth (they're still expensive, but not as prohibitive as they were previously). At that time, I found this article (http://www.prime-junta.net/pont/How_to/a_Brush_Your_Sensor/a_Brush_Your_Sensor.html?page=1), which offers a much less expensive suggestion. It could be worth checking out if you want to try a brush almost identical to the VD products without paying their high prices (a bit of "elbow grease" is required - just be careful to keep it off the sensor!). ;)
more...
Dhundhun
07-10 01:43 AM
.. X made appeal and you continued working with X. Why do you think this to be illegal?
.. Y applied for H-1B transfer and it got approved. So why do you think problem in joining Y?
.. I think passport validity of six months used to be OK for Visa Stamping. Check this one. Preferably it is better to get new passport - people are getting some times stuck for months in PIMS.
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
.. Y applied for H-1B transfer and it got approved. So why do you think problem in joining Y?
.. I think passport validity of six months used to be OK for Visa Stamping. Check this one. Preferably it is better to get new passport - people are getting some times stuck for months in PIMS.
.. It should be OK to take job with Y (assuming that you have I-797 from Y with I-94) and then getting Visa stamped when new passport arrives.
thakkarbhav
08-26 03:28 PM
Normally in the job ad they specify if they need greencard holder or citizen. If they have not specified and you have job then it is all set. EAD is the document which establish your right to work. so they ask it when you join them. They will take photocopy of it. You need to update them when you renew your EAD.
more...
abhijitp
07-09 12:44 AM
Chindambaram's statement on HSMP rule change. Article has mention of H1B too.
This is why I think it is not such a bad idea. Yeah, there may be other reasons why IV core does not think this is a good idea.
http://www.workpermit.com/news/2007_01_30/uk/india_unhappy_about_immigration_policy.htm
30 January 2007
There are close cultural and economic ties between the The United Kingdom and India. However, the two Countries are at odds over immigration. The Indian Finance Minister, Palaniappan Chidambaram, has warned that Britain would be the "loser" if immigration laws are not relaxed to make it easier for Indians to work in the UK.
Since 5 December 2006 it has become more difficult for many overseas workers to obtain the coveted HSMP visa in the UK. This is a sore point between the two nations at a time when both are looking at forging closer economic ties. However, it should be noted that there is no quota on the number of skilled professionals allowed into the UK under the HSMP or work permit scheme.
Recent comments during a trip to India from Gordon Brown, UK's Chancellor of the Exchequer, about raising caps on foreign investment, were considered a bit absurd by some business commentators because his government had just made sweeping changes to the Highly Skilled Migrant Programme (HSMP), affecting several thousand Indians. Indians are the largest national group affected by the changes.
"Many knowledge workers could go abroad for three months, six months or a year and add to our exports, but they are constrained by a very restrictive visa regime and local tax laws," said Mr. Chidambaram.
"If a qualified professional from India is denied entry and that place is taken by a less qualified person from, say, Eastern Europe, surely the UK is the loser?"
Mr. Chidambaram's comment seems directed at various European Union policies to favor professionals from within the EU. One of the main aims of the EU is to make it possible for an EU citizen to work freely in any EU Country. Most EU Citizens have been able to benefit from the free movement provisions for many years.
A very similar line of reasoning is regularly put forth regarding the H-1B visa in the United States. Both the U.S. and the UK, along with all the most advanced western nations such as Canada, Australia and New Zealand, are aggressively competing for the most educated and skilled migrant workers from around the globe, regardless of country of origin. However, compared to employers in the other Countries, it is quite difficult for US employers to obtain a visa to employ skilled professionals in the US.
Mr. Chidambaram, 61, was educated at Harvard Business School and represents himself as a strong supporter of free trade.
This is why I think it is not such a bad idea. Yeah, there may be other reasons why IV core does not think this is a good idea.
http://www.workpermit.com/news/2007_01_30/uk/india_unhappy_about_immigration_policy.htm
30 January 2007
There are close cultural and economic ties between the The United Kingdom and India. However, the two Countries are at odds over immigration. The Indian Finance Minister, Palaniappan Chidambaram, has warned that Britain would be the "loser" if immigration laws are not relaxed to make it easier for Indians to work in the UK.
Since 5 December 2006 it has become more difficult for many overseas workers to obtain the coveted HSMP visa in the UK. This is a sore point between the two nations at a time when both are looking at forging closer economic ties. However, it should be noted that there is no quota on the number of skilled professionals allowed into the UK under the HSMP or work permit scheme.
Recent comments during a trip to India from Gordon Brown, UK's Chancellor of the Exchequer, about raising caps on foreign investment, were considered a bit absurd by some business commentators because his government had just made sweeping changes to the Highly Skilled Migrant Programme (HSMP), affecting several thousand Indians. Indians are the largest national group affected by the changes.
"Many knowledge workers could go abroad for three months, six months or a year and add to our exports, but they are constrained by a very restrictive visa regime and local tax laws," said Mr. Chidambaram.
"If a qualified professional from India is denied entry and that place is taken by a less qualified person from, say, Eastern Europe, surely the UK is the loser?"
Mr. Chidambaram's comment seems directed at various European Union policies to favor professionals from within the EU. One of the main aims of the EU is to make it possible for an EU citizen to work freely in any EU Country. Most EU Citizens have been able to benefit from the free movement provisions for many years.
A very similar line of reasoning is regularly put forth regarding the H-1B visa in the United States. Both the U.S. and the UK, along with all the most advanced western nations such as Canada, Australia and New Zealand, are aggressively competing for the most educated and skilled migrant workers from around the globe, regardless of country of origin. However, compared to employers in the other Countries, it is quite difficult for US employers to obtain a visa to employ skilled professionals in the US.
Mr. Chidambaram, 61, was educated at Harvard Business School and represents himself as a strong supporter of free trade.
2010 technique Mercedes SLK
Aah_GC
08-28 11:12 PM
I have had the same problem. I have contributed $700 so far, but any attempts to access donor forum was just left to emails where Pappu would point to some other guy. This guy would mess up my profile and I would be left with interupted access to even my non-donor profile.
The moment I cancelled monthly contribution off, I got an email and then some prompt follow ups. I explained my case and got a phone number to follow up which I did not call. Why should I?
I understand this site is not run by dedicated professionals, but what about folks who have contributed not just in terms of money but by participating, acting on action items, promoting IV? Why cant you just give access to donor forums to folks who contributed in excess of atleast $500? (just to satiate my selfish limit)?
The moment I cancelled monthly contribution off, I got an email and then some prompt follow ups. I explained my case and got a phone number to follow up which I did not call. Why should I?
I understand this site is not run by dedicated professionals, but what about folks who have contributed not just in terms of money but by participating, acting on action items, promoting IV? Why cant you just give access to donor forums to folks who contributed in excess of atleast $500? (just to satiate my selfish limit)?
more...
razis123
01-27 02:06 AM
so does it mean in the coming months the July fiascos 485 applications will be processed....then what..?
hair First Look: SLK 350
bostonian28
02-17 08:09 PM
As far as I can see Yates memo is what is addressing this issue specifically, based on that I think you should be good, i.e your current employer cannot revoke 140 (please see yates memo)......
It is my opinion....
It is my opinion....
more...
gc_kaavaali
09-16 05:03 PM
It is my request only!!! Can you please stop replying in 'Red' color? It is really annoying.
Having stated the above which pretains only to those cases which are still in process.
For those who have their GC in their hand, the situation could be slightly different.
If you do not join the company, it is considered as SHAM EMPLOYMENT.
I am also in the same boat and I checked with a leading lawyer, According to her advice it is better to wait for 6 months or atleast couple of months before changing the employer.
GCProbs has an advantage here, since the Company A is about to be shut down wait till then. Obtain details about it and keep it with you. Just in the event of a question, you can answer.
By the way, I have decided to join another company after 2 months.
Jumping the boat immediately might cause trouble.
So please be patient and give it as much as time as possible. I will say at least 2-3 months.
Having stated the above which pretains only to those cases which are still in process.
For those who have their GC in their hand, the situation could be slightly different.
If you do not join the company, it is considered as SHAM EMPLOYMENT.
I am also in the same boat and I checked with a leading lawyer, According to her advice it is better to wait for 6 months or atleast couple of months before changing the employer.
GCProbs has an advantage here, since the Company A is about to be shut down wait till then. Obtain details about it and keep it with you. Just in the event of a question, you can answer.
By the way, I have decided to join another company after 2 months.
Jumping the boat immediately might cause trouble.
So please be patient and give it as much as time as possible. I will say at least 2-3 months.
hot 2005 Mercedes-Benz SLK350
ponvas
08-10 05:24 PM
This mustang may be GC or citizen holder already . Want to have fun with people who are crying for help!!!
more...
house 2009 Mercedes-Benz SLK 350
rahulpaper
09-06 12:48 PM
Did you travel out of US while you were on F1 and your AOS was in process?
If yes...did you use AP to re-enter?
If yes...did you still maintain your F1 status?
Thanks in advance for your reply.
Received card production ordered email today!!!
For all those whose spouses are in F1 status do not worry
I applied through my husband(EB3 July 2004) and i was on F1 when i applied with him. Got funding through F1. Did not use 485 EAD.
Graduated but did not apply for OPT and started using 485-EAD to work.
Well... one more thing our lawyer forgot to include our BC while applying.
Actually he had them when he mailed them initially in DEC 2004 but got rejected and after he came back from vacation in March 05 he reapplied based on the rejected mail in Dec 04 and its then when he forgot to include BC.
I was ver scared reading about F1 being non immigrant visa blah blah... and should not apply for GC..blah blah..unfortunately i could not find a similar case like me...recently i saw a lot of people applying in F1 ...
I am happy to tell...do not worry if you are on F1 and
do not travel on F1 visa
Do not apply for OPT ( my limited knowledge advice)
Your lawyer knows the best!
Regarding LUDs:
If you guys see LUDs on your cases atleast one...be very happy...that means they are about to give you a green card...
I am planning on attending the Rally to show my support to 1V
I hope 2007 will be lucky to every one
Believ me journey through 485 process is nerve-wracking...
Just think if it really makes a difference think about it ...no
Just believe in god ( satyanarayan swami pooja cheyinchukondi)...dont laugh
All the Best:o
EB3
PD : July 2004
RD : March 2005
VSC--> TSC : Mar 2007
LUDs on 485 : July 29, Sep3rd 4th
and card production ordered on 5th
If yes...did you use AP to re-enter?
If yes...did you still maintain your F1 status?
Thanks in advance for your reply.
Received card production ordered email today!!!
For all those whose spouses are in F1 status do not worry
I applied through my husband(EB3 July 2004) and i was on F1 when i applied with him. Got funding through F1. Did not use 485 EAD.
Graduated but did not apply for OPT and started using 485-EAD to work.
Well... one more thing our lawyer forgot to include our BC while applying.
Actually he had them when he mailed them initially in DEC 2004 but got rejected and after he came back from vacation in March 05 he reapplied based on the rejected mail in Dec 04 and its then when he forgot to include BC.
I was ver scared reading about F1 being non immigrant visa blah blah... and should not apply for GC..blah blah..unfortunately i could not find a similar case like me...recently i saw a lot of people applying in F1 ...
I am happy to tell...do not worry if you are on F1 and
do not travel on F1 visa
Do not apply for OPT ( my limited knowledge advice)
Your lawyer knows the best!
Regarding LUDs:
If you guys see LUDs on your cases atleast one...be very happy...that means they are about to give you a green card...
I am planning on attending the Rally to show my support to 1V
I hope 2007 will be lucky to every one
Believ me journey through 485 process is nerve-wracking...
Just think if it really makes a difference think about it ...no
Just believe in god ( satyanarayan swami pooja cheyinchukondi)...dont laugh
All the Best:o
EB3
PD : July 2004
RD : March 2005
VSC--> TSC : Mar 2007
LUDs on 485 : July 29, Sep3rd 4th
and card production ordered on 5th
tattoo 2009 Mercedes-Benz SLK350
bklog_sufferer
12-05 08:45 PM
can anyone answer this please??
more...
pictures Mercedes -slk 350 (05/21/2005)
wandmaker
12-11 07:46 AM
Do you all know Omnibus Funding Drive thread rocks? We had a great start today and we will have a good finish
Go IVans Go!
Go IVans Go!
dresses 2009 Mercedes-Benz SLK350
chaukas
10-15 01:39 PM
I work for a large ( very large ) software company ( No its not MSFT or Oracle ).
We have quite a few interns from India and they don't even talk about working here. Their goal is to do a masters and go back to India.
We have quite a few interns from India and they don't even talk about working here. Their goal is to do a masters and go back to India.
more...
makeup 2008 Mercedes SLK350 Roadster
radhagd
03-09 04:05 PM
My friend has 2 I-140s one EB3 (PD Dec 2002) and second one EB2 (PD Nov 2006) - what is the best option for him.
Whether he can use earlier PD for EB2 (I-485).
Please share your knowledge.
Yes he can use earlier PD for EB2.
He can file I485 in EB2 by requesting recapturing priority date from EB3.
Whether he can use earlier PD for EB2 (I-485).
Please share your knowledge.
Yes he can use earlier PD for EB2.
He can file I485 in EB2 by requesting recapturing priority date from EB3.
girlfriend Mercedes SLK 350 Roadster,
keepwalking
05-21 12:22 PM
Thank you very much for your prompt reply.
Please let know if you took infopass appointment or help from Congressmen to push for your wife's I485 processing
Filed at : Nebraska Service Center
For Wife
Filed 485 on March 10, Finger printing May 6th, GC Approved May 9th, GC received May 13th
My Wife was on EAD/OPT based on her student visa (and not on H4)
Please let know if you took infopass appointment or help from Congressmen to push for your wife's I485 processing
Filed at : Nebraska Service Center
For Wife
Filed 485 on March 10, Finger printing May 6th, GC Approved May 9th, GC received May 13th
My Wife was on EAD/OPT based on her student visa (and not on H4)
hairstyles Mercedes-Benz SLK350 Roadster
joeshmoe
09-04 12:37 PM
Congrats!!!!:cool:
I remember you because you created the "June 1st filers - receipt " thread.
I hope many approvals come soon.
I would appreciate detailed signature will help us.
See my signature, hope it helps. I got an LUD on my 485 on August 30th but I had no idea why, I guess it might have been the NameCheck and then this email this morning .... unf.. believable!
I remember you because you created the "June 1st filers - receipt " thread.
I hope many approvals come soon.
I would appreciate detailed signature will help us.
See my signature, hope it helps. I got an LUD on my 485 on August 30th but I had no idea why, I guess it might have been the NameCheck and then this email this morning .... unf.. believable!
coolpal
06-30 12:58 PM
so far, I have heard about at least 30 cases over the internet including one personal case (my wife's) and all of the cancelled appointments seem to be either on 7th, 8th or 9th july. (My wife had it on 8th and got a cancellation notice with the same date which was delivered yesterday...)
From forums, it appears that, a few of them already got their rescheduled notices, and some got the new date after calling... either way, I guess the above info seems to be true..... worst case scenario, if you don't get rescheduled notices (or dates by calling) by your appointment date, just go to the ASC. I know it's a pain... but I just don't want to give them a chance at denying and don't want to go thru all that hassle...
pal :)
From forums, it appears that, a few of them already got their rescheduled notices, and some got the new date after calling... either way, I guess the above info seems to be true..... worst case scenario, if you don't get rescheduled notices (or dates by calling) by your appointment date, just go to the ASC. I know it's a pain... but I just don't want to give them a chance at denying and don't want to go thru all that hassle...
pal :)
TheCanadian
01-02 08:24 PM
Are you saying we can submit past works?